Polycom DOC2238A Manuel d'utilisateur télécharger pdf (Page 35)

MGC+ Hardware and Installation Manual

2-15

Installing the I/O Card for the ReadiManager IAM

To install the I/O card for the ReadiManager IAM:

1. Remove the right rear I/O cover by loosening the four screws as shown

in the following illustration.

Figure 2-5: MGC+ 50/100 rear panel detachment

2. Remove the I/O card for the ReadiManager IAM from its package and

insert it in its slot as shown in the following illustration.

Figure 2-6: MGC+ ReadiConvene IAM rear I/O Insertion

3. Push the I/O card firmly into the MGC+ backplane. Make sure its is

properly seated in its slot.

4. Tighten the four screws that secure the I/O card to the MGC+ chassis.

5. Attach the required cables or connections to the I/O card for the

ReadiManager IAM.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 159 160

Pas de commentaire

Polycom DOC2238A Manuel d'utilisateur Page 35