Polycom DOC2231A Manuel d'utilisateur télécharger pdf (Page 43)

Chapter 3 - MGC+ Software Installation and Configuration

3-11

Cards

Configuration

Click this button to automatically detect the IP address

and Alias (if known) of the IP+ cards installed on the

MCU.

The IP+ card type and its slot number, IP address and

alias are listed. When the Obtain IP Address

automatically (DHCP) check box is selected, the IP

address of the card appears as 0.0.0.0.

To configure a specific IP+ card:

Highlighting and then double clicking on any card.

Enter or change the IP address, and add the card’s

Alias if required and click OK.

Subnet Mask Enter the subnet mask of the MCU’s IP+ card. If the

DHCP is used, the subnet mask is automatically

retrieved from the DHCP server and cannot be

modified. For more details, see the MGC Administrators

Guide, Chapter 3, “Defining an IP Network Service”.

Table 3-1: IP Configuration Parameters (Continued)

Field Description

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 115 116

Pas de commentaire

Polycom DOC2231A Manuel d'utilisateur Page 43