Polycom V2IU Manuel d'utilisateur télécharger pdf (Page 62)

User Guide V

IU 6400-S Converged Network Appliance

7 - 16

2. In the System menu, select Services Configuration.

3. Scroll to Enable Remote System Logging, and check the box.

4. Enter information as described in the following table:

5. Press Submit.

Field Description

Remote Syslog Host: The address of the system running a

system log server. By default, the system

sends to port 514. The system log port

can be set by adding a colon and the port

number to the end of the address: e.g.

ADDRESS[:PORT]

Local Hostname: Set the hostname for this system. By

default, the hostname is the system type.

Enable MOS Scoring: Enable MOS scoring for media that is

passing through the 6400-S. Disabling

MOS scoring will improve system

performance. By default, MOS scoring is

Enabled.

MOS Threshold: Set the minimum allowable MOS for the

system . MOS values below this value will

cause system messages to be sent to the

system log. By default, the value is 2.5

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 81 82

Pas de commentaire

Polycom V2IU Manuel d'utilisateur Page 62