Polycom V2IU Manuel d'utilisateur Page 46

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 82
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 45
User Guide V
2
IU 6400-S Converged Network Appliance
6 - 4
4. Configure Deny Hostwise TCP (IP-Port) according to the rules in
Advanced setting rules on page 6-4. This setting denies all traffic
matching the specified TCP port numbers and the specified source IP
addresses
5. Configure Deny Hostwise UDP (IP-Port) according to the rules in
Advanced setting rules on page 6-4. This feature denies all traffic
matching the specified UDP port numbers and the specified source IP
addresses
6. Configure Allow Hostwise TCP (IP-Port) according to the rules in
Advanced setting rules on page 6-4. This setting allows all traffic
matching the specified TCP port numbers and the specified source IP
addresses
7. Configure Allow Hostwise UDP (IP-Port) according to the rules in
Advanced setting rules on page 6-4. This setting allows all traffic
matching the specified UDP port numbers and the specified source IP
addresses
8. Press Submit.
Advanced setting rules
Follow these rules when configuring advanced settings:
Separate multiple entries with spaces.
Specify a port using the dash (-), as in 192.168.3.1-23 for Telnet.
Indicate a range of ports with a colon (:). For example, 192.168.3.1-23:50
means perform the action on ports 25 through 50
Classful IP addresses are assumed by default. For example: 192.168.3.1
uses a class "c" mask. Specify subnets using the forward slash (/), as in
192.168.3.1/24
Enabling or disabling the firewall
1. To disable the firewall, check or uncheck the Enable Firewall box.
2. Press Submit.
Vue de la page 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 81 82

Commentaires sur ces manuels

Pas de commentaire