Polycom DOC2559C Manuel d'utilisateur télécharger pdf (Page 57)

Polycom RMX 4000 Hardware Guide

2-13

5 Carefully slide the MPM+/MPMx card out through the front panel.

Installing the Replacement MPM+/MPMx Card

1 On the card to be installed, move the ejector levers to their fully open

position.

2 Slide in the replacement MPM+/MPMx card.

3 Push the MPM+/MPMx card firmly into the Backplane, making sure

it is properly seated in its slot.

4 Ensure that the metal ejector levers are fully retracted into their

housings.

5 Tighten the captive screws on the front panel of the RMX that secure

the MPM+/MPMx card to the chassis.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 63

Pas de commentaire

Polycom DOC2559C Manuel d'utilisateur Page 57