Polycom DOC2559C Manuel d'utilisateur télécharger pdf (Page 26)

Chapter 1- Hardware Description

1-20

Connecting Cables to the RMX 4000

To connect the cables (AC and DC systems):

• RTM-IP 4000:

— Connect the Management Network cable to LAN 2.

— Connect the Signalling cable to LAN 3.

— Connect the Shelf Management cable to LAN 6.

•For each installed RTM LAN - Connect the LAN cable to LAN 2.

•For each installed RTM ISDN:

— Connect the E1/T1 cables to their PRI Ports.

— Connect the LAN cable to LAN 1.

Figure 1-6 RMX 4000 Rear Panel View with AC Power and Communication

Cables

LAN Connections to RTM LAN

Power Cables

Off/On

switch

E1/T1 Connection to RTM ISDN

Shelf



Manage-

ment

Management

Network

Signalling

Network

• LAN 4, LAN 5 and the Serial ports are only for debugging and not for

customer use.

• Do not remove the protective plastic caps from LAN 1, LAN 4 and LAN 5

ports.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 62 63

Pas de commentaire

Polycom DOC2559C Manuel d'utilisateur Page 26