Polycom DOC2559A Manuel d'utilisateur télécharger pdf (Page 21)

Polycom RMX 4000 Hardware Guide

1-15

Placing the RMX 4000 in a 23” Rack

1 Mounting the RMX 4000 on a 23” rack requires that first the handles

and then the 19” brackets be removed from the MCU. This is shown

in Figure 1-4.

Figure 1-4 Removing and attaching 19” and 23” brackets

2 After removal, attach the 23” brackets as provided in the Rack

Installation Accessories kit, and re-install the handles to the 23”

brackets. This is shown in Figure 1-5.

Figure 1-5 Installing the handles and brackets & detailed rear view of 23” bracket

attachment

3 Mount the RMX on top of the rack brackets using the blades or place

it on a rack mount shelf with chassis runners.

4 Fasten the RMX to the rack with 8 screws into the holes provided on

the RMX’s front as shown in Figure 1-3.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 64 65

Pas de commentaire

Polycom DOC2559A Manuel d'utilisateur Page 21