Polycom DOC2557A Manuel d'utilisateur télécharger pdf (Page 12)

Chapter 1-Hardware Description

1-8

Connecting Cables on the RMX 1500

To connect the cables:

•For the RTM-IP 1500 module:

— Connect the Media cable to LAN 2 port.

— Connect the Network cables to the MNG (Signaling) port &

MNGB (Management Network) port.

— (Optional) Connect the Shelf Management cable to the Shelf port.

•For the RTM ISDN 1500 module:

— Connect the E1/T1 cables to their PRI (1-4) ports.

Figure 1-1 RMX 1500 Rear Panel View with AC Power and Communication

Cables

First-time Power-up

1 For first entry installation, you must insert the USB key containing the

modified IP addresses in USB slot on the RMX’s front panel. For more

information see, the RMX 1500/2000/4000 Getting Started Guide,

"Procedure 1: First-time Power-up” on page 2-19.

2 Turn ON the power by pressing on the power switch located on the

front panel of the RMX 1500.

E1/T1 PRI

Connection(s)

Power Cable

LAN 2; media, MNG; signaling,

MNGB; management & Shelf

The LAN 1, LAN3, LAN4 and Modem ports are not be used and the plastic caps

covering those ports should not be removed.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 28 29

Pas de commentaire

Polycom DOC2557A Manuel d'utilisateur Page 12